Monster 2 1:8th 25V Car ESC Waterproof w/ 2650kv Motor

CSE010-0108-04
This will be drop shipped from our vendor!
Monster 2 1:8th 25V Car ESC Waterproof w/ 2650kv Motor

The Castle Mamba Monster 2 Waterproof 1/8 Scale Brushless Combo includes the sensored 1512 2650Kv motor and is recommended for 1:8 scale vehicles and 1:10 scale 4WD SCT up to 9lbs.
The Mamba Monster 2 is an incredibly powerful sensorless ESC capable of 2S to 6S LiPo operation. It's also waterproof, so you can run your vehicle just about anywhere. It features an easy-access case allowing you to replace fans quickly, if necessary. Additionally, Mamba Monster 2 features solder posts, so changing battery wire length is simple.

The 1512 1Y Sensored 4-Pole Brushless Motor combines rotor position sensor technology with an improved high power and high efficiency motor design to deliver ultra smooth startup, precise low speed control, incredible torque, and lightning fast response. Through the use of Castle's Smart Sense technology, the position of the rotor is always known by the ESC, eliminating the possibility of encountering cogging, and allows the 1512 to deliver great throttle control and smooth starts, with the power and run times that Castle motors are known for.

NOTE:
Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit. The cooling fan must be removed prior to driving in wet conditions. It is not waterproof.

Motor Features:

Exceptional efficiency, Less heat

Oversized gold plated solder tabs easy soldering

QUIETSENSE Technology shields magnetic field noise generated from the motor

Design eliminates the need for mechanical timing adjustments

Sensor alignment delivers uniform timing/torque in both directions automatically

Rebuildable design

High strength 180*C neodymium sintered magnets

10 AWG high strand wire with silicone insulation

6061-T6 Billet aluminum heatsink can

High RPM NMB oversized bearings

Low resistance gold plated bullet connectors

Motor Specifications:

Input Voltage Range: 2-4S LiPo

Kv: 2650 Max. RPM: 60,000

Length: 67.7mm, Diameter: 40mm (41.1mm w/fins)

Weight (w/wires): 383 g / 13.6oz

Shaft Diameter: 5mm

Mounting Hole Specifications: M3 & M4 @ 25mm

Connectors: 6.5mm

ESC:

Input Voltage Range: 2S - 6S LiPo

BEC Specifications: 5-7 volts; default 5.5 volts

Reversible: Yes, but may be disabled for racing

Cooling Fan: Yes, removable

Length: 2.19" (56mm), Width: 1.86" (47mm), Height: 1.33" (34mm)

Connectors: 6.5mm bullets for motor. No battery connector

Fully programmable using Castle Link

*REPLACES CSE010-0108-02*